Ghost 2 Immobiliser Reviews
The Ghost 2 immobiliser uses the latest technology to ward off car theft. This hidden device is not detected by thieves and will only start your engine when an app or PIN code is entered.
It connects to the CAN data network in your vehicle and is weatherproof. It comes with a service/valet feature that allows you to temporarily start your car when it is in garage.
Easy to install
The Ghost immobiliser shields your car from theft of keys, cloning and hacking. It is an PIN code system that is integrated into the car's electronic control unit, making it impossible for thieves to detect. It's not noticeable and does not use any sensors or special keys. It's also cheaper than replacing an ECU or installing a key fob. You could even lower your insurance premiums.
Follow the directions of the manufacturer when installing follow the manufacturer's instructions when installing a Ghost 2 vehicle immobiliser. This will ensure the device is working correctly and efficiently. Test the system following installation by entering the PIN and then starting the vehicle. Regular testing will enable you to spot any issues early on.
Double-check the location of CAN H and L wires before beginning the installation. These are crucial to powering the immobiliser, therefore it is essential to ensure that they are connected correctly. Labeling the wires will help you locate them when installing. Once you have identified the location of these wires and connected them to a permanent 12V power source as well as the grounding point. Use a fuse tap to protect the connections against damage or short-circuits.
After connecting the wires neaten the wiring with cable ties to prevent alteration. You can also cover the connections with insulation tape or heat-shrink tubing. This will shield the device from electrical shorts and will extend the life of the device. Once the wiring is secured it's a good idea test the Ghost 2 immobiliser.
In the event that you have to hand over your vehicle, such as for servicing or valet parking or valet parking, the Ghost 2 immobiliser has a service mode that temporarily disables the PIN code sequence. Press the brake pedal and hold the accelerator down for a number of times equal to the first digit of the emergency code. The system will then enter service mode. This is confirmed by flashing five times the indicator signal.
It is simple to change PIN codes
A ghost 2 immobiliser is an excellent way to safeguard your vehicle from theft. It is concealed inside the vehicle and can only be accessed by a unique code. The device communicates with the vehicle ECU through its data bus. It does not rely on radio frequency signals as alarm systems that are sold on the market or traditional Thatcham immobilisers do. This makes it difficult for thieves to detect the click of an immobiliser relay or add new key fobs. The control unit is hidden within the wiring harness or dashboard and is not physically accessible to reset the system.
web link is linked to your vehicle's CAN Data network. It makes use of buttons on the steering, door panels and centre console, to create a customized sequence of up to twenty button presses, which must be entered to start the engine, just as a PIN. This innovative next-generation system does not require any cutting of wires during installation and is fully reprogrammable at anytime. You can even start your car in either Service or Valet mode after you hand the vehicle to a mechanic who will do work.
You can also make use of the app to change your PIN number or disable it completely if you have lost your keys. This feature is especially useful in the event that you've lent your car away to someone else for valet service or parking. It stops them from starting the car and driving it off without your permission. It is also undetectable to professional thieves because it doesn't make use of any radio frequencies or circuit cuts.
Another benefit of the ghost 2 immobiliser is its capability to prevent thefts of relays. Relay theft is one of the most frequent methods of car theft. Criminals gain access to the diagnostic ports of your car, then modify the signal sent by the car's ECU to convince it that the car's key is valid and present. The traditional immobiliser is able to be bypassed this way, but with the ghost 2 immobiliser, the signal is blocked by the immobiliser before it reaches the ECU.
Simple to use app
Ghost 2 is a revolutionary immobiliser that safeguards your car from key-cloning, hacking, and key theft. It connects to the CAN data network of your vehicle and requires a PIN code in order to start the engine. It also prevents thieves from using signal spoofing and device spoofing, both of which are common techniques used to steal vehicles.
The system is easy to use and functions as an ordinary auto alarm. Installing the system allows you to create a unique 20-digit pin code that you must enter before starting the vehicle. This will protect the vehicle from being stolen even if the keys are removed. You can turn off the system using an app for your smartphone.
The ghost is quiet, and it does emit radio frequency signals. It is a weatherproof, discrete device that can be installed anywhere inside your vehicle. It can be concealed under the dash, the steering wheel, or even the door panels. It communicates over the CAN data loop with your ECU and is not affected by the diagnostic tools used by thieves to identify security systems. It is also not affected by jamming devices which spoof codes.
It is a hidden installation that does not require any cutting of wires or modifications to the vehicle it can be employed as an anti-theft device for all cars. Its technology has been proven be efficient and is in line with TASSA standards. The Ghost is a great option for classic or sports cars. It can also be used as a method to protect vehicles rental on apps such as Turo.
The Autowatch Ghost 2 represents the next generation of vehicle immobilisers. The system is inaccessible to thieves and blocks them from starting your car unless they have your PIN or are authorized by the app. It also doesn't emit any radio frequencies or other signals that could be detected by scanners. Installation is simple and quick. The app is simple to navigate and offers a user-friendly interface which allows for easy set up and use. It also comes with an GPS tracker that can assist police find the vehicle and locate it.
Easy to reset
A ghost 2 immobiliser is an excellent method to guard your car from being stolen. It connects to your vehicle's ECU to create a security barrier that thieves cannot penetrate without the correct PIN. how much is a ghost immobiliser is also TASSA-certified, which means that it's acknowledged by insurance companies. It's a powerful tool for preventing car theft and could save you a significant amount of money in the long run.
The Ghost system unlike traditional alarms and immobilisers that require circuit cutting, is directly connected to the vehicle's CAN data network. It operates through the buttons on your dashboard as well as the steering wheel. You can create a unique pin that can be up to 20 presses long. The PIN has to be entered before the engine can begin the engine, just like a credit card. Ghost is unnoticeable to thieves and has no LED indicators to give away its presence, which makes it the most reliable aftermarket CAN bus immobiliser available on the market currently.
The Ghost system also has a benefit that it doesn't transmit radio frequency signals. This means that it is not detected by thieves or snatched up. This stops key attacks that replicate and relay attacks, as and the typical method of hacking into the computer system of a car using its CAN bus searching for signals. In addition to this, the Ghost system is designed to be completely hidden within your vehicle. There are no lights or signals to indicate its presence.
The system also features a Transport Mode that disables the Ghost system that is helpful in situations in which you have to temporarily disable it, such as during transportation or servicing. However this mode isn't as efficient as Service Mode, as it does not turn off the Ghost system when your vehicle speeds over 31 mph for fifteen minutes.
To reset your ghost 2 immobiliser you'll need the emergency code, which you can obtain from your installer. It is typically hidden under a scratch-off area on the card included with the installation. You should keep this emergency code safe and store it in a safe place that is secure, such as your wallet at home.